Solar Green Roof Solar WRB

Optigrün Solar WRB is a load-supported solar mounting frame for penetration-free roof mounting of PV modules or rows of PV modules.

The versatile subframe assembly makes it possible to mount almost all standard solar modules, with inclines of 10°, 15° or 20°.

The rows of modules can be installed in a south-facing or east-west orientation. The modules can be attached to it both vertically (portrait) and horizontally (landscape).

The RETENTION ROOF FLOW CONTROL is an economical and efficient product for rainwater retention and water discharge delay. In combination with the solar mounting frame, multifunctional roof use is possible.

The use of the proven Water Retention Box WRB 80F helps to maintain the natural water balance by increasing evaporation and minimising surface discharge.

Ecological value    -  
Maintenance requirements    -  
Costs/m2 * from 90 €/m2
* for 1,000 m2, net, (green roof structure and solar mounting frame) incl. installation, without PV modules.
Suggest cost details are omitted as these may vary in different markets.

 

Weight (system solution including mounting frames and PV modules)* from 120 kg/m²
from 1,2 kN/m²
Build-up depth from 140 mm
Roof pitch
Vegetation form

Sedum

Peak discharge coefficient and drainage rate Can be adapted for the specific property
Retention volume approx. 72 l/m2
Water reservoir 95-150 l/m2
* In line with the requirements of the FLL Green Roof Guidelines, temporary water accumulation is not taken into account in the stated weight information.

PHOTOVOLTAIC MODULE

Manufacturer as selected

& 3 SOLAR MOUNTING FRAME SOLAR WRB

Load-supported solar mounting frame consisting of base plate, bracket and Water Retention Box WRB 80FMA with capillary columns

SEDUM VEGETATION

Sedum planting with several species using vegetation mat, plug plants or sedum cuttings

EXTENSIVE SUBSTRATE

Substrate tailored to the specification

Suction and Capillary Fleece RMS 500K

Optimum water distribution under the substrate layer

Water Retention Box WRB 80F

With high retention volume and optimum water discharge delay

PROTECTION AND STORAGE FLEECE RMS 500

Protects the waterproofing against damage and stores water

WATERPROOFING

On a suitable roof structure with 0 degree fall